45-degree and 90-degree copper bends available with centre line radius of 1.5D.
| Phosphorous Deoxidised Copper | 122 |
| Annealing Temperature | 450°C to 650°C |
| Melting temperature | 1,100°C |
| NOMINAL SIZE (mm) |
ACTUAL OUTSIDE DIAMETER (mm) |
WALL THICKNESS (mm) |
CENTRELINE RADIUS (mm) |
|---|---|---|---|
| 250 | 254 | 3.0 | 380 |
| 300 | 305 | 3.0 | 457 |
| 350 | 355 | 3.0 | 532 |
| 400 | 406 | 3.0 | 609 |
| 450 | 457 | 3.0 | 685 |
| 500 | 508 | 3.0 | 762 |
Pressed from 3mm copper sheet with all ends to suit OD of tube.
| NOMINAL SIZES (mm) |
|---|
| 100 |
| 125 |
| 150 |
| 200 |
| 250 |
| 300 |
| 350 |
| 400 |
Both eccentric and concentric reducers are manufactured to order in sizes from 50mm to 600mm with a wall thickness of 3mm.
Stub: One-piece pressed copper, 3mm thick
Flange: Steel, fusion bonded epoxy coating
| NOMINAL SIZES (mm) |
|---|
| 250 |
| 300 |
| 350 |
| 400 |
| 450 |
| 500 |
Fabricated from 3mm thick copper tube.
| NOMINAL SIZE | A (mm) | B (mm) | C (mm) | D (mm) |
|---|---|---|---|---|
| 250 | 554 | 150 | 150 | 20 |
| 300 | 605 | 150 | 150 | 25 |
| 350 | 756 | 200 | 200 | 25 |
| 400 | 806 | 200 | 200 | 25 |
Available in 2.5m lengths with one end expanded ready for on site installation.
| Phosphorous Deoxidised Copper | Alloy C122 |
| Annealing Temperature | 450°C to 650°C |
| Melting temperature | 1,100°C |
| NOMINAL SIZE (mm) |
ACTUAL OUTSIDE DIAMETER (mm) |
WALL THICKNESS (mm) |
|---|---|---|
| 250 | 254 | 3.0 |
| 300 | 305 | 3.0 |
| 350 | 355 | 3.0 |
| 400 | 406 | 3.0 |
| 450 | 457 | 3.0 |
| 500 | 508 | 3.0 |
